Hertz S8 DSP Hi-Res Digital Signal Processor
The ultra-compact S8 DSP is the perfect solution for integrating any OEM source into any audio upgrade project for cars, motorcycles, and boats! S8 DSP is a distilled essence of technology at the service of the highest audio quality in a corrosion-free case cast in metal and composite materials.
- Hi-Res audio (96 kHz/24-bit native resolution) for unparalled audio quality
- Built-in USS technology (Universal Speakers Simulator), S8 DSP can also be correctly connected to head units with “speaker load detection” function that monitors the presence of a low-impedance load to enable the audio outputs
- Upload a setup file via BT through the Bluetooth 5.0* APP when in “Configurator” or “DRC” mode
- Configurable via PC, Mac, Android, or iOS devices
- Compact size featuring all connections on one side
- S8 DSP features a sturdy enclosure with an anti-corrosion-treated PCB
Technical Specifications
XGeneral | |
---|---|
Nominal Power supply voltage / fuse: | 7 - 20 VDC / 1A |
Pulse operating voltage: | 5 - 24 VDC |
Idling current: | 0.34 A |
OFF current (ART= OFF): | <80 uA |
OFF current (ART= ON): | <80 uA |
Remote IN | 6 - 20 VDC (10 mA) |
Remote OUT | 4 - 20 VDC (150 mA) |
ART - Automatic Remote Turn on/off from BTL speaker outputs (selectable): | 1.5 - 7 VDC |
Max size W x H x D (mm/inch) | 130 x 33.8 x 88,3 / 5.11 x 1.44 x 3.47 |
Weight (kg/lbs) | 0.66 / 1.45 |
Input Stage | |
---|---|
Analog low level Inputs | 6 ch. (Differential input) (Molex microfit to RCAs) |
Analog high level Inputs | 6 ch. (Differential input) (Molex microfit to tripped ends) + USS (Universal Speakers Simulator) |
Digital inputs | Yes (Coaxial SPDIF; up to 24bit 96KHz) (Molex microfit to RCA) |
Input sensitivity (low level) | 0.8V – 6V RMS |
Input sensitivity (high level) | 2.5V – 21V RMS |
Analog inputs management | Audio input routing matrix type |
Analog inputs eq | 7 bands paragraphic for each input channel |
ART | Automatic Remote Turn-On/Off with Speaker-In |
Output Stage | |
---|---|
Analog outputs (rca) | 8 channels |
Max output level (rms) @ 0.05% THD | 4V |
95dBA Analog outputs management | The DSP controls each output channel: gain, crossover, EQ, delay, polarity |
Bandwidth | 10Hz – 40KHz (+/-3db) |
Signal to noise ratio (A weighted) | 105dBA (Analog Input) 112dBA (Digital Input) |
THD+N (@ 1Vrms out, @ 1Khz) | <0.005% |
Crosstalk (channel separation) @ 1KHz | >95dBA |
Digital Signal Processor | |
---|---|
Sample rate | 96KHz |
Bit depth | 24 |
Output equalizer | 15 bands per channel w/ adjustable Q and Frequency |
Equalizer resolution | 1/10th dB per step +12dB / -12dB |
Time alignment (distance) | 0 - 468.4 cm / 0 - 184.4 inches |
Time alignment (time) | 0 - 13.5ms |
Time alignment (step) | 0.08 ms; 2.8 cm / 1.1 inch |
Time alignment (fine set) | 0.02 ms; 0.7 cm / 0.27 inch |
Crossovers | AP/HP/LP/BP all channels |
Crossover type | Butterworth, Linkwitz-Riley, Bessel (All Channels) |
Crossover slope | From 6dB/oct. until 30dB/oct. (6dB step) |
Crossover steps | 120 steps 20Hz-20KHz |
Mute function | I can mute every channel separately or all together. |
Presets | 4 presets |
Presets selection | 2 specific wires to control the 4 presets selection by extarnal switches. |
Input selection by wire | One specific wire to select the desired input between Analog or Digital. |
Audio signal compressor on output stage | Yes (enable/disable) |
DSP chipset | Analog Device: ADAU1451 |
DSP management by bt app (iOS/ Android) |
|
Setup file sharing via BT | Upload a setup file via BT through the BT APP when in “Configurator” or “DRC” mode. |
DSP management by pc / mac / ios / android | Microsoft Windows (32/64 bit): Windows 10 (USB and BT BLE) Windows 11 (USB and BT BLE) Mac Os: 10.13 Hight Sierra or later (USB and BT BLE) |
The ultra-compact S8 DSP is the perfect solution for integrating any OEM source into any audio upgrade project for cars, motorcycles, and boats! S8 DSP is a distilled essence of technology at the service of the highest audio quality in a corrosion-free case cast in metal and composite materials.
S8 DSP processes the audio signal with 96 kHz / 24-bit resolution and has obtained the Hi-Res certification from the JAS (Japan Audio Society), an acknowledgment that certifies the extreme level of audio performance achieved.
The powerful 32-bit DSP manages 6 high/low-level analog input channels, one digital coaxial input, and 8 output channels, offering maximum freedom of configuration to the specialist. The SPDIF coaxial input is ideal for digital connection with a Hi-Res player, a solution that allows for maximum listening quality. For each of the eight output channels we have a level control, the 15-pole parametric equalizer, time delays, and crossover filter available. The 7-band parametric equalizer of the input signal allows obtaining a flat response from OEM sources, which often have an exaggerated emphasis on the low frequency.
Technologies
Hi-Res Audio - Hi-Res audio (96 kHz/24-bit native resolution) for unparalled audio quality.
USS (Universal Speakers Simulator) - Thanks to the built-in USS technology , S8 DSP can also be correctly connected to head units with “speaker load detection” function that monitors the presence of a low-impedance load to enable the audio outputs.
Bluetooth 5.0 - Upload a setup file via BT through the Bluetooth 5.0* APP when in “Configurator” or “DRC” mode. *Music streaming not supported.
App Control - Configurable with a PC, a Mac, an Android device, or an iOS device. iOS/ Android control APPs (Bluetooth 5.0), DRC control over app from iOS/Android devices.
Ultra Compact - Compact size featuring all connections on one side to be installed anywhere.
Conformal Coating PCB - S8 DSP features a sturdy enclosure with an anti-corrosion-treated PCB to ensure years of listening pleasure in open nature.